100% Brand new and high quality
Features
Simple operation, supporting flexible and arbitrary combination
Working way---jog, inter-lock, and self-lock, it can be switched by the 1, 2, 3 spot.
Output method by A, B, C three pads to switch the output charged and output switch signal switching
Mainly used in lamps and lanterns, electric door, window, lifting equipment, gateway, hoist, industrial control and security industry, and other fields
Technical parameters
Receiver (switch)
Working voltage: AC220V
Work frequency: 433MHz
Maximum load: 1500 W
Working way: jog, self-lock and inter-lock (Adjustable by pad)
Dimensions: 6.50*3.50*2.00cm (L*W*H)
Learning method:
Hold the learning key until the indicator put out, then press any button of remote, indicator will flash 4 times, then will keep lighting, at that time, it means it learns successfully.
Note: the controller can learn fixed code (PT2262, SC2260 chip, etc.) / learning code (EV1527, HS2240, etc.) 20 different codes
Press any key of remote controls, if beyond, it will clear the first studying remote controller code.
Clearing method:
Continuously hold learning key about 8 seconds until the indicator put out, then keep lighting, it means it clears successfully
Working/output way:
Jog: press one button is working /ON. Loosen your finger on the same button is stop/OFF. One channel switch (receiver) need one buttons remote control (transmitter)
Self -lock: press one button for one time is working/ON. Press the same button again is stop/OFF. (One channel switch (receiver) need one buttons remote control (transmitter)
Inter-lock: press one button is working/ON, press another button is stop/OFF. (One channel switch (receiver) need 2 buttons remote control (transmitter)
Please notice that:
Here is the 1CH and 2 buttons remote control. You can choose the all the working way that you can choose, you have better choose the Jog or self-lock, so all the buttons has been used.
Please tell us the working way that you want after you buy it, if you are not the professional person, we would set the working way as your requirement before we ship.
1x Receiver
2x Remote Controllers
'