1500W Peak Modified Sine Wave Car Power Inverter DC 12V/24V to AC 220V Charger Converter Black
Installation: Turn the switch in the (OFF) position, connect the converter to the battery and ensure good contact. Make sure that the power of the electrical appliance used is below the nominal power. Plug the 220V electrical appliance directly into the 220V socket on the converter and ensure that the sum of the power of the electrical appliances connected to the two outlets is within the standard nominal power. Turn on the switch, green indicator lights on, indicating that it is working properly. When the red indicator lights on, it means that the converter has shut down because of overvoltage/undervoltage/overload/overtemperature. In many cases, due to the limited output of the car cigarette lighter plug, the converter will alarm or shut off. At this time, as long as the vehicle is started or the power is reduced, it can be restored to normal. Use environment: Given security and performance, the installation environment should have the following conditions: Dry: can\'t soak in water or rain Cool: 0~ 40℃ Ventilation: no obstacle 5cm above the body shell, the other side surface should be well ventilated Specifications: Product color: black Product net weight: 560g Product gross weight: 610g Product size: 200 x 98 x 58mm/7.87 x 3.86 x 2.28" Output voltage: 220V Frequency: 50±2Hz Waveform: Modified Sine Wave Input voltage: 12.8-13.2V Built-in fuse: 60A Undervoltage alarm: 10.2-10.8V Low voltage shutdown: 9.2-9.8V Overvoltage shutdown: 15-16V No-load consumption: 12V input No-load current: <0.5A Maximum power: >90% Continuous output power: 500W 30 minutes continuous power: 1500W Peak power: 3000W Notes: 1. The television, display, motor, etc., reach their peak voltage at start-up. Although the converter may be subject to peak power, which is twice the rated power, some appliances whose power meets the requirements may exceed the peak output power of the converter. The overload protection is triggered, the current is turned off, and multiple appliances are driven. This may happen. At this time, turn off the appliance switch, turn on the power switch, and then turn on the power switch one by one, and turn on the appliance with the highest peak value first. 2. During use, the 1 2 V / 24 V battery voltage begins to drop. When the DC input voltage of the converter drops to 104V - 11V / 19V - 21V, the alarm sounds and the computer or other sensitive The appliance is turned off in a timely manner. If the alarm sound is ignored, the converter automatically shuts down when the voltage drops to 9.7 V - 1 0. 3 V / 18 V - 19 V, which prevents the battery from being over-discharged. After the power protection is turned off, the red indicator lights up. 3. The vehicle should be started in time to charge the battery to prevent power failure, affecting the start of the car and battery life. Although the converter has overvoltage protection, input voltages exceeding 1 6 V/3 0 V may still damage the converter. After continuous use, the shell surface temperature will rise to 60°C 4. The positive and negative poles cannot be reversed, keeping the surrounding air free from objects that are affected by high temperatures. 5. Please read the user guide carefully before using this product. 1 x Car Power Inverter |